特高压互连电气设备减震性能振动台试验          下载免费PDF全文

程永锋  孟宪政  卢智成  刘振林  邱宁  马跃 《地震工程学报》2019,41(2):292-298

为研究铅金属减震器对特高压互连电气设备的减震效果,进行由硬管母线连接的特高压避雷器设备和电容式电压互感器设备组成的互连耦合体系的地震模拟振动台试验。通过白噪声扫频、抗震及减震试验,测定互连耦合体系抗震结构及减震结构的自振频率以及关键部位的应变、加速度响应。试验结果表明:抗震结构中避雷器设备的最大应变响应大于互感器设备,互连耦合体系中的避雷器设备属于易损设备;安装减震器后互连设备频率降低幅度较小,减震器基本不会影响电气设备的正常运行;安装减震器后互连耦合体系中的避雷器设备和互感器设备在较大峰值加速度地震波作用下,设备顶端加速度响应和最大应变响应均有较大幅度的降低,避雷器设备和互感器设备的最大应变响应的减震效率分别为75%和50%,减震效果显著,减震器的应用大幅提升了互连耦合体系的抗震能力。  相似文献   

Response of hybrid isolation system during a shake table experiment of a full‐scale isolated building     

Keri L. Ryan  Taichiro Okazaki  Camila B. Coria  Eiji Sato  Tomohiro Sasaki 《地震工程与结构动力学》2018,47(11):2214-2232

A full‐scale 5‐story steel moment frame building was subjected to a series of earthquake excitations using the E‐Defense shake table in August, 2011. For one of the test configurations, the building was seismically isolated by a hybrid system of lead‐rubber bearings and low friction roller bearings known as cross‐linear bearings, and was designed for a very rare 100 000‐year return period earthquake at a Central and Eastern US soil site. The building was subject to 15 trials including sinusoidal input, recorded motions and simulated earthquakes, 2D and 3D input, and a range of intensities including some beyond the design basis level. The experimental program was one of the first system‐level full‐scale validations of seismic isolation and the first known full‐scale experiment of a hybrid isolation system incorporating lead‐rubber and low friction bearings. Stable response of the hybrid isolation system was demonstrated at displacement demands up to 550 mm and shear strain in excess of 200%. Torsional amplifications were within the new factor stipulated by the code provisions. Axial force was observed to transfer from the lead‐rubber bearings to the cross‐linear bearings at large displacements, and the force transfer at large displacements exceeded that predicted by basic calculations. The force transfer occurred primarily because of the flexural rigidity of the base diaphragm and the larger vertical stiffness of the cross‐linear bearings relative to the lead‐rubber bearings.  相似文献   

基于FEA的填充墙与隔震器协同抗震系统性能分析          下载免费PDF全文

李然 《地震工程学报》2018,40(5):891-896

隔震器与填充墙对建筑抗震性能有很大作用。为了探究填充墙布置形式及填充材料和隔震器协同作用对钢筋混凝土框架结构动力特性及抗震性能的影响,采用等效斜撑理论,对3种不同填充墙布置形式与隔震器协同作用的抗震系统方案进行对比分析,研究发现顶层不布置填充墙与隔震器协同抗震系统钢筋混凝土框架结构的抗震性能最佳。在此系统上分析了不同填充材料对钢筋混凝土框架结构抗震性能的影响,结果表明,加气混凝土砌块填充墙的钢筋混凝土框架结构抗震性能最好。  相似文献   

Characterizing hydrological processes within kettle holes using stable water isotopes in the Uckermark of northern Brandenburg,Germany     

Stuart Andrew Vyse  Majid Taie Semiromi  Gunnar Lischeid  Christoph Merz 《水文研究》2020,34(8):1868-1887

Understanding the hydrologic connectivity between kettle holes and shallow groundwater, particularly in reaction to the highly variable local meteorological conditions, is of paramount importance for tracing water in a hydro(geo)logically complex landscape and thus for integrated water resource management. This article is aimed at identifying the dominant hydrological processes affecting the kettle holes' water balance and their interactions with the shallow groundwater domain in the Uckermark region, located in the north-east of Germany. For this reason, based on the stable isotopes of oxygen (δ¹⁸O ) and hydrogen (δ²H ), an isotopic mass balance model was employed to compute the evaporative loss of water from the kettle holes from February to August 2017. Results demonstrated that shallow groundwater inflow may play the pivotal role in the processes taking part in the hydrology of the kettle holes in the Uckermark region. Based on the calculated evaporation/inflow (E/I) ratios, most of the kettle holes (86.7%) were ascertained to have a partially open, flow-through-dominated system. Moreover, we identified an inverse correlation between E/I ratios and the altitudes of the kettle holes. The same holds for electrical conductivity (EC) and the altitudes of the kettle holes. In accordance with the findings obtained from this study, a conceptual model explaining the interaction between the shallow groundwater and the kettle holes of Uckermark was developed. The model exhibited that across the highest altitudes, the recharge kettle holes are dominant, where a lower ratio of E/I and a lower EC was detected. By contrast, the lowest topographical depressions represent the discharge kettle holes, where a higher ratio of E/I and EC could be identified. The kettle holes existing in between were categorized as flow-through kettle holes through which the recharge takes place from one side and discharge from the other side.  相似文献   

Hydrological regulation of chemical weathering and dissolved inorganic carbon biogeochemical processes in a monsoonal river     

Jing Liu  Jun Zhong  Hu Ding  Fu-Jun Yue  Cai Li  Sen Xu  Si-Liang Li 《水文研究》2020,34(12):2780-2792

To better understand the mechanisms relating to hydrological regulations of chemical weathering processes and dissolved inorganic carbon (DIC) behaviours, high-frequency sampling campaigns and associated analyses were conducted in the Yu River, South China. Hydrological variability modifies the biogeochemical processes of dissolved solutes, so major ions display different behaviours in response to discharge change. Most ions become diluted with increasing discharge because of the shortened reactive time between rock and water under high-flow conditions. Carbonate weathering is the main source of major ions, which shows strong chemostatic behaviour in response to changes in discharge. Ions from silicate weathering exhibit a significant dilution effect relative to the carbonate-sourced ions. Under high temperatures, the increased soil CO₂ influx from the mineralisation of organic material shifts the negative carbon isotope ratios of DIC (δ¹³C_DIC) during the high-flow season. The δ¹³C_DIC values show a higher sensitivity than DIC contents in response to various hydrological conditions. Results from a modified isotope-mixing model (IsoSource) demonstrate that biological carbon is a dominant source of DIC and plays an important role in temporal carbon dynamics. Furthermore, this study provides insights into chemical weathering processes and carbon dynamics, highlighting the significant influence of hydrological variability to aid understanding of the global carbon cycle.  相似文献   

Kainsaz(CO3)陨石中两个富Al球粒的氧同位素组成特征与形成演化     

戴德求  包海梅  刘爽  尹锋 《岩石学报》2020,36(6):1850-1856

富Al球粒是原始球粒陨石中一种矿物岩石学特征介于富钙铝包体(CAIs)和镁铁质硅酸盐球粒之间的特殊集合体,所以常常认为富Al球粒在认识CAIs和镁铁质硅酸盐球粒形成演化过程中的相互联系具有特殊意义。然而,对富Al球粒的初始物质组成以及形成演化过程一直存在较多争议,而氧同位素组成研究能够对球粒演化和早期星云环境等提供重要的信息。在本文中我们报导了来自Kainsaz(1937年降落于俄罗斯,CO3型)碳质球粒陨石中的2个富Al球粒(编号K1-CH1和K2-CH2)的矿物岩石学和氧同位素组成特征。K1-CH1的矿物组成主要为橄榄石、低钙辉石和富钙长石,K2-CH2为橄榄石和富钙长石。2个球粒中的矿物均具有贫~(16)O同位素组成特征。K1-CH1中矿物的△~(17)O组成基本上位于2个区间:-11.1‰～-8.7‰和-3.9‰～0.4‰;而K2-CH2的△~(17)O介于-6.6‰～-0.6‰之间,且具有从中部至边部升高的趋势。矿物岩石学和氧同位素特征表明,这2个富Al球粒的初始物质组成为富CAIs和镁铁质硅酸盐。在球粒熔融结晶过程中,与贫~(16)O同位素组成(△~(17)O:-8.7‰～-7.8‰)的星云发生了氧同位素交换。球粒形成后,发生迁移进入陨石母体,在相对更贫~(16)O同位素组成(△~(17)O:-0.6‰～0.4‰)的母体中(流体参与)发生变质作用,并再次发生了氧同位素交换。  相似文献   

波纹钢管铅阻尼器耗能性能分析研究          下载免费PDF全文

周云  吴胜 《世界地震工程》2020,(4):103-111

提出一种波纹钢管铅阻尼器，介绍了其构造、工作机理、布置形式及特点，采用ABAQUS软件，建立钢管阻尼器、波纹钢管阻尼器和波纹钢管铅阻尼器有限元模型，对其应力分布，传力路径和滞回性能进行模拟分析。结果表明:波纹钢管铅阻尼器耗能减震机理明确，工作性能和耗能性能稳定，滞回曲线饱满以及耗能能力强，具有良好的变形和延性，极限变形大；波纹钢管铅阻尼器通过在波纹钢管内设置铅芯使初始刚度、承载能力和耗能能力得到大幅度提高，既有效保持了波纹钢管的变形能力，又避免波纹钢管发生局部屈曲，使波纹钢管耗能能力得到充分发挥。波纹钢管铅阻尼器在1mm小位移下就可以进入耗能，而且很快进入稳定耗能状态，等效阻尼比稳定在0.3~0.4之间。  相似文献   

Calibration of oxygen isotope fractionation and calcite-corundum thermometry in emery at Naxos,Greece     

Rachelle B. Turnier  Yaron Katzir  Kouki Kitajima  Ian J. Orland  Michael J. Spicuzza  John W. Valley 《Journal of Metamorphic Geology》2020,38(1):53-70

Corundum (Crn), including sapphire, occurs in emery pods surrounded by marble on the island of Naxos, Greece. The emery formed from bauxite deposited in karst that was metamorphosed to 400–700°C at 20–15 Ma. Many of these rocks initially appeared well suited for refractory accessory mineral (RAM) thermometry, which uses oxygen isotope fractionation between a RAM – corundum – and a modally dominant phase with faster diffusion of oxygen – calcite (Cc) – to determine peak metamorphic temperatures. However, previous attempts at oxygen isotope thermometry were confounded by highly variable fractionations (Δ¹⁸O) measured at mm-scale and the uncertain calibration of Δ¹⁸O(Cc-Crn) versus temperature. Secondary ion mass spectrometry (SIMS) permits in situ analysis of δ¹⁸O in corundum and calcite at the 10-μm scale in adjacent grains where textures suggest peak metamorphic equilibrium was attained. SIMS analyses of adjacent mineral pairs in eight rocks yield values of Δ(Cc-Crn) that systematically decrease from 7.2 to 2.9‰ at higher metamorphic grade. Pairing these data with independent temperature estimates from mineral isograds yields an empirical calibration of 1,000 lnα(Cc-Crn) = 2.72 ± 0.3 × 10⁶/T² (T in K). The new fractionations (2.7‰ at 1,000 K) are significantly smaller than those calculated from the modified increment method (6.5‰ at 1,000 K; Zheng, Geochimica et Cosmochimica Acta, 1991, 55:2299–2307; Zheng, Mineral Mag, 1994, 58A:1000–1001), which yield unreasonably high temperatures of 630 to 1,140°C when applied to the new Naxos data. The new calibration of Δ(Cc-Crn) can be combined with published fractionations to calculate A-factors for corundum versus a range of 14 other minerals. These new fractionation factors can be used for thermometry or to constrain the genesis of corundum. A compilation of gem corundum δ¹⁸O values shows that many igneous sapphires, including important deposits of basalt-associated sapphire, are mildly elevated in δ¹⁸O relative to the calculated range in equilibrium with mantle values (4.4–5.7‰) and formed from evolved magmas.  相似文献   

长江口盐度梯度下不同形态碳的分布、来源与混合行为   总被引：1，自引：0，他引：1  

叶君  姚鹏  徐亚宏  王金鹏  赵彬 《海洋学报》2019,41(4):15-26

河口碳的生物地球化学过程是全球碳循环的重要组成。通过测定溶解无机碳（DIC）及其稳定同位素丰度（δ13C_DIC），溶解有机碳（DOC），有色溶解有机物（CDOM），颗粒有机碳（POC）及其稳定同位素丰度（δ13C_POC）与元素比值（N/C）及相关指标，研究了2014年7月长江口盐度梯度下不同形态碳的分布、来源和混合行为。结果表明，DIC浓度、DOC浓度、POC含量分别为1 583.2~1 739.6 μmol/L，128.4~369.4 μmol/L和51.2~530.8 μmol/L，这些不同形态碳及CDOM的荧光组分的分布模式相似，均是从口内到口外，整体呈现先增大后减小的趋势，并与盐度呈现非保守混合行为。添加作用主要发生在在口门处最大浑浊带附近。与含量相反，从口内到口外，δ13C_DIC和δ13C_POC均呈现逐渐减小再增大的趋势，在口门附近达到最低值，分别为-9.7‰和-26.7‰。在口门附近不同形态碳含量上升及δ13C_DIC、δ13C_POC的降低可能主要与沉积物再悬浮及微生物作用有关。基于蒙特卡洛模拟的三端元混合模型的结果显示，河口内外POC来源变化明显，口内POC以陆源有机碳贡献为主，平均为62.3%，口外海源贡献逐渐增加。CDOM相关参数结果表明长江口CDOM主要来自陆源输入，海源及人类活动等也对其产生影响。  相似文献   

胶东半岛洪水岚汤温泉水化学特征与成因分析     

袁星芳 《地质与勘探》2020,56(2):427-437

胶东半岛蕴藏着丰富的低温地热资源,以温泉为主要出露方式。洪水岚汤温泉位于胶东半岛东部威海市境内,出露在阳泉河北岸的一级阶地,出露标高为66. 83 m,水温约69℃,下伏基岩为侏罗纪二长花岗岩。为查明其水化学特征及成因,本文采用同位素水文地球化学方法进行研究。水化学成分表明:温泉水中主要阳离子为Na~+,主要阴离子为HCO_3~-、SO_4~(2-),水化学类型为HCO_3·SO_4~-Na,pH值为7. 6,总溶解性固体为610. 6 mg/L,F~-含量为4. 2 mg/L,偏硅酸含量为98. 8 mg/L。氢、氧同位素分析结果显示:温泉热水补给来源为大气降水,估算温泉热水补给高程为427～599 m,地下热储温度约为106. 25℃,地下热水循环深度约为2091 m。综合分析洪水岚汤温泉成因模式为:在正棋山山区获得大气降水入渗补给后,沿F1断裂破碎带下渗经历深循环获得大地热流加热后上升,上升过程中混入浅层地下水,在第四系静水压力最小的部位出露成泉。  相似文献